RAC Plus User’s Manual
4-4
4-5
RAC Plus Menu Functions
The Menu key of the RAC allows you to select from a variety of functions.
After pressing the Menu button, the Add and Sub keys can be used to scroll
through the options, which are displayed in D-2. To select an option, press
the ENT (Enter) key.
Menu 1 & 2 - Calibration Procedures
Refer to Chapter 3, Calibration, for full details on calibration procedures.
Menu 3 - Pre-Distance
The Pre-distance feature will allow you to enter a known distance starting
point other than zero. It could be where you left off before lunch, or just
beginning at a known station. This feature also allows you to Add or to
subtract off a distance currently on display in D-1.
Note: The RAC must be in Count Hold to use Pre-Distance.
Step 1
Press the Menu key, the #3 key then
the Enter key. At this point, the unit is
ready to have a distance entered.
Step 2
Using the numeric keys, key in the
desired distance (up to 6 digits), then
press Enter.
Step 3
Press Enter to return to the initial menu
screen, then press Enter again to exit
the menu function. You are now back
in the normal mode with the distance
set to the value you entered.
Note: If you just want to add to the
distance already on display in D-1, in
Step 2, rather than pressing Enter, press the Add key. To subtract from the
current distance, press the Sub key.
Chapter 4 — Key Functions & Operating Procedures
Fig. 4.2 — Enter Pre-Distance
Fig. 4.3 — Distance Entered
Fig. 4.4
Normal mode w/ Pre-distance set
To Next Page
Loading...
