Black Cat II Radar Recorder User’s Manual
3-10
The Site Templates fields can be used to enter location details of where
the data is being collect.
The Measurements fields can be used to enter the details of how the radar
is installed. These include:
Height from Road – Enter how high the Radar is mounted above the road.
Edge of Near Lane – Enter the distance from the Radar to the START of
the first lane.
Near Lane Width – Enter the width of the near lane.
Edge of Far Lane – Enter the distance from the Radar to the START of
the far lane.
Far Lane Width – Enter the width of the far lane.
The Orientation fields can be used to enter how the Radar is set up with
respect to traffic.
Number of lanes – select either 1 or 2
Lane 1 Direction – select either Approach or Recede. (Lane 1 is the lane
closest to the Radar.)
Lane 2 Direction – select either Approach or Recede (Lane 2 is the lane
furthest from the Radar).
Unit Head Angle – provides the angle the radar head should be pointed
based on the height from the road and the distance to the road.
The Misc. fields can be used to enter two specific settings for the radar:
Units – Select either Imperial (US) or Metric.
Radar Facing – Enter which direction the Radar is pointing, either Right
or Left.
Once you have the settings you want, click the Upload & Start button.
To Next Page
