What to do if JAMO Receiver DMR 60 remote control not working?
If your JAMO Receiver DMR 60 unit isn't responding to the remote control, first ensure that new batteries (2 x “AAA” R6P) are properly inserted. If batteries are new, make sure they aren't worn out and replace them. Also, verify that you are pointing the remote directly at the remote sensor on the DMR 60, and that you are within 5 meters of the unit.
Why is there no sound coming from my JAMO Receiver?
If your JAMO Receiver has no sound, the volume might be set to 0. Try turning up the volume. Also, check the speaker cords to ensure they are correctly connected.
How to fix no picture on my JAMO Receiver?
If your JAMO Receiver shows no picture, ensure that the TV is switched ON and connected correctly.
What to do if my JAMO DMR 60 is not turning on?
If the power is not supplied to your JAMO Receiver even though the power cable is connected, make sure the power plug is securely connected to the outlet. Also, verify that the wall plug is turned ON.
What to do if JAMO Receiver DMR 60 does not respond to some operating commands?
If your JAMO Receiver DMR 60 does not respond to some operating commands during playback, operations may not be permitted by the disc. Read the instructions on the disc.
Why can't JAMO Receiver play the disc?
To Next Page
General
