Fridgewatch 2000 Controller Mk5
Section 3 Publication 3-59
Issue 3.2 : 05.23 Page 40 of 222
11.3. Double Set Point and Days
The Double Set Point and Days Settings page is accessed from the
Double Set Point and Days Settings button via the Menu Page.
The Fridgewatch provides the facility to toggle or slide between two
different sets of control values; No 1 start value, No 1 set point and No 1
stop value, and No 2 start value, No 2 set point and No 2 stop value:
refer to 21.1. Compressor Settings.
There are certain rules, which must be followed when using two different
start, value/set point/stop value sets.
Start value/set point/stop value are listed and described in 15. Principles
of Control to view or change settings refer to this section.
Fig 32 Double Set Point & Set Day of the Week