37
Editing a Chase
Menu Fields
Settings
Edit Chs: St Of Ch To At Del
Add
Chs 6 1 6 12 12 50 Off
Off
Chase Number
Step
Number of Steps Recorded
Channel
Delete
Add
Range
Figure 21
The Edit Chase Menu
and TO fields. AT can be changed by using the Plus (+) and
Minus (-) buttons or by moving the TOP preset fader until its level
matches the previously recorded level. Once a match has been
acheived the slider takes control of the level and can be used to set
the AT field.
For the slider to ‘take control’ of a channel recorded at Zero level
(AT=0) it is necessary to move the slider above zero, to select the
channel, then back to zero to match the level, then to the new level
setting.
ADD (Add)
The ADD field is used to Add a step to a chase. Move the cursor
to the ADD field and press ON (+).
DEL (Delete)
The DEL field is used to delete a step to a chase. Move the cursor
to the DEL field and press ON (+).
To Next Page
Loading...
Need help?
General