- 32 -
AMD Series User's Manual
BIOS SETUP UTILITY
JUSTw00T!
DRAM Timing Configuration
Auto
Limit
Manual
←
Select Screen
↑↓
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Memory Clock Mode
DRAM Timing Mode
Memory 2T Mode
[Auto]
[Auto]
[2T Mode]
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
Options
►
DRAM Timing Conguration
Click <Enter> key to enter its submenu.
• Memory Clock Mode
This item is to select the memory clock mode.
• DRAM Timing Mode
This item is to select the DRAM Timing mode.
• Memory 2T Mode
This item is to select the Memory 2T mode.
・
Press <Esc> key to return to "JUSTw00T!" menu.
• Bank Interleaving
Sets the bank interleaving feature.
• Enable Clock to All DIMMs
This item is to enable or disable the unused clocks to DIMMs even the memory slots are not
populated.
• MemClk Tristate C3/ATLVID
Enables or disables the MemClk Tri-Stating during C3 and Alt VID.
• Memory Hole Remapping
Enables or disables the memory remapping around the memory hole.
• DCT Unganged Mode
This item allows the selection of the unganged DRAM mode (64-bit width).
• Power Down Enable
This item is to enable or disable the DDR power down mode.
• Page smashing
S/W Control of Page Smashing Mechanism
To Next Page
Loading...
Need help?
General
