14
q
Setting Spool Pins
The spool pins are used for holding the spools
of thread when feeding the thread to the ma-
chine.
To use, pull up the spool pins. Push down for
storage.
Removing or Inserting the Bobbin Case
Open the hook cover.
q Hook cover
Raise the needle by turning the handwheel toward
you.
Take out the bobbin case by holding the latch.
w Latch
When inserting the bobbin case, place the horn
into the recess of the hook race.
e Horn
w
e
Reverse Stitch Control
Press the stitch control to sew in reverse.
To Next Page
Loading...
