What to do if my Janome MOD-30 is skipping stitches?
If your Janome sewing machine is skipping stitches, it could be due to several reasons. The needle may be incorrectly inserted, bent, or blunt. Also, the needle and/or threads might not be suitable for the fabric. For stretch, very fine fabrics, and synthetics, consider using a blue tip needle. Ensure the needle thread is properly threaded, and check if you're using a poor-quality needle.
Why is my Janome MOD-30 Sewing Machine so noisy?
Your Janome sewing machine might be noisy because thread has been caught in the hook race. Another possibility is that lint has built up in the hook race or bobbin holder.
What to do if my Janome MOD-30 is not working?
If your Janome sewing machine isn't working, first check if it's properly plugged in. Also, check for thread caught in the hook race. Ensure the bobbin winder spindle is returned to the left after bobbin winding.
Why is the fabric not feeding smoothly in my Janome Sewing Machine?
If the fabric isn't feeding smoothly through your Janome sewing machine, the feed dog might be packed with lint. Also, the stitches might be too fine, or the feed dog might not be raised after “drop feed” sewing.
Why is my Janome MOD-30 needle thread breaking?
The needle thread may be breaking because it is not threaded properly, or the needle thread tension is too tight. Also, the needle might be bent, blunt, or incorrectly inserted. Ensure the needle and bobbin threads are set under the presser foot when starting to sew. Finally, the thread might be too heavy or fine for the needle.
Why is my Janome Sewing Machine needle breaking?
Your Janome sewing machine needle might be breaking because it is incorrectly inserted or the needle clamp screw is loose. Ensure that threads were drawn to the rear after sewing. The needle could also be too fine for the fabric, or an inappropriate presser foot might be in use.
What to do if the bobbin thread breaks on my Janome MOD-30?
If the bobbin thread is breaking, make sure it's threaded properly in the bobbin holder. Lint accumulation in the bobbin holder could also be the cause. Check if the bobbin is damaged and not turning smoothly, or if the thread is wound loosely on the bobbin.
Why is my Janome Sewing Machine seam puckering?
Seam puckering on your sewing machine can occur if the needle thread tension is too tight, or the needle thread is not threaded properly. The needle might be too heavy for the fabric, or the stitch length is too long. When sewing very fine fabrics, ensure a stabilizer is used.
Why are there loops on the seams of my Janome MOD-30?
Loops on the seams may appear if the needle thread tension is too loose. Also, the needle could be too thick or too fine for the fabric.
Why is buttonhole sewing not sewn properly on my Janome MOD-30?
If buttonholes aren't sewing properly, the stitch density might not be suitable for the fabric. For stretch or synthetic fabrics, ensure interfacing is used. Check that the buttonhole lever is lowered.
General| Brand | Janome |
|---|---|
| Model | MOD-30 |
| Category | Sewing Machine |
| Language | English |
Covers DANGER and WARNING guidelines to prevent injury and electric shock during operation.
Identifies and labels all external components of the sewing machine.
Lists and illustrates all included attachments and tools.
Step-by-step guide to plugging in and powering on the machine.
Initial setup recommendation to run the machine without thread.
Overview of basic controls and functions.
How to adjust sewing speed using the slider and foot control.
Instructions for attaching and using the extension table for increased workspace.
Explanation of the free-arm feature for sewing tubular items.
Details on using the Start/Stop, Reverse, and Auto-lock buttons.
Explains information shown on the screen, including stitch and setting indicators.
Describes how to navigate modes and use function keys for adjustments.
Guide on choosing stitch patterns using the LCD and function keys.
How to use the lever to raise and lower the presser foot.
Procedure for safely removing and attaching presser feet.
Steps for detaching and reattaching the foot holder assembly.
How to balance tension for ideal stitches.
Specific guidance on adjusting tension for zigzag stitches.
Adjusting feed dog height and needle stop position.
Procedure for replacing the sewing needle.
Recommendations for needle types based on fabric and thread.
Instructions for placing thread spools and guides.
How to use the accessory spool pin.
Steps for winding thread onto a bobbin.
Procedure for correctly placing the wound bobbin.
Step-by-step guide for threading the upper needle.
Instructions for using the automatic needle threader.
Final step to bring bobbin thread to the top.
Fundamental stitch for seams.
Techniques to begin and end seams securely.
How to pivot fabric for sewing corners.
Specific method for creating sharp corners.
Tips for sewing through heavy materials.
Using built-in guides for seam allowance.
Adjusting the needle's side-to-side position.
Adjusting the density of the stitches.
Secures seams with automatic backstitching.
Creates an invisible locking stitch.
Durable stitch for elastic fabrics.
Narrow stitch for knits and bias seams.
Versatile stitch for various applications.
Prevents fraying of raw edges.
For finishing stretch fabric edges.
Seams and finishes edges simultaneously.
Introduces available buttonhole styles.
Detailed guide for sewing square buttonholes.
Method for creating reinforced buttonholes.
Adjusting the width of buttonholes.
Adjusting the density of buttonhole stitches.
Guide for sewing round-ended buttonholes.
Guide for sewing keyhole buttonholes.
Technique for creating buttonholes with a cord.
Reinforces stress points like pockets and seams.
Process for making eyelets for belts or reinforcement.
Instructions for installing zippers.
How to fit the correct zipper foot.
Detailed procedure for sewing zippers into garments.
Technique for creating invisible hems.
Method for attaching buttons securely.
Process for creating fabric gathers.
Decorative technique for joining fabric pieces.
Decorative stitch creating a textured edge.
Technique for applying decorative fabric shapes.
Creating fringe effects by removing threads.
Decorative technique involving removing threads.
Stitch for joining fabric pieces with an open appearance.
Decorative edge stitch.
Decorative stitch for joining or closing layers.
Dense decorative stitch.
Troubleshooting tips for stitch appearance.
Essential cleaning procedure for smooth operation.
Correct method for fitting the bobbin holder.
Interpreting error messages and audible alerts.
Solutions for common sewing issues.
To Next Page
