22
(7.0)
(3.5)(0.0)
Altering the Needle Drop Position
The needle drop position can be altered for straight stitch
patterns 00 to 04.
Press the mode key q until the cursor w appears under
the stitch width value.
Press the “–” sign on the value set key to move the
needle to the left.
Press the “+” sign on the value set key to move the
needle to the right.
q Mode key
w Cursor
e Value set key
q
w
e
Altering the Stitch length
The stitch length can be altered.
Press the mode key q until the cursor w appears under
the stitch length value.
Press the “+” sign on the value set key to increase the
stitch length.
Press the “–” sign on the value set key to decrease the
stitch length.
q Mode key
w Cursor
e Value set key
w
e
q
To Next Page
Loading...
Need help?
General
