Why does the needle thread break on my Janome MOD-200?
The needle thread may break due to several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is incorrectly inserted. * The needle and bobbin threads are not set under the presser foot when starting to sew. * The thread is either too heavy or too fine for the needle.
Why does the needle break on my Janome Sewing Machine?
The needle may break because: * The needle is incorrectly inserted. * The needle clamp screw is loose. * The threads were not drawn to the rear after sewing. * The needle is too fine for the fabric being used. * An inappropriate presser foot is used. Use the correct foot.
Why is my Janome MOD-200 so noisy?
Your sewing machine might be noisy because thread has been caught in the hook race, or lint has built up in the hook race or bobbin holder.
Why Janome MOD-200 does not work?
Your Janome Sewing Machine may not work if it is not plugged in, thread has been caught in the hook race, or the bobbin winder spindle is not returned to the left after bobbin winding.
Why does my Janome MOD-200 make seam puckering?
Seam puckering can occur if: * The needle thread tension is too tight. * The needle thread is not threaded properly. * The needle is too heavy for the fabric being sewn. * The stitch length is too long for the fabric; make the stitch shorter. * A stabilizer is not used when sewing very fine fabrics; apply a stabilizer.
Why is the fabric not feeding smoothly through my Janome MOD-200 Sewing Machine?
The fabric might not feed smoothly because the feed dog is packed with lint, the stitches are too fine (make stitch longer), or the feed dog is not raised after “drop feed” sewing.
What causes loops on the seams of my Janome MOD-200?
Loops on the seams can be caused by the needle thread tension being too loose, or the needle being too thick or too fine for the fabric.
Why is buttonhole sewing not sewn properly on my Janome MOD-200?
Buttonhole sewing may not be sewn properly if the stitch density is not suitable for the fabric being sewn, interfacing has not been used for the stretch or synthetic fabric (apply an interfacing), or the buttonhole lever is not lowered.
General| Buttonhole Styles | 1 |
|---|---|
| Max Stitch Width | 5mm |
| Max Stitch Length | 4mm |
| Adjustable Stitch Length | Yes |
| Adjustable Stitch Width | Yes |
| Needle Threader | Yes |
| Free Arm | Yes |
| Bobbin Type | Top-loading |
Connects the machine to power via foot control or start/stop button.
Adjusting sewing speed using the slider and foot pedal.
Attaching/detaching the extension table and storing accessories.
Utilizing the free-arm for sewing tubular items or small areas.
Explains the function of Start/Stop, Reverse, Auto-lock, and Needle Up/Down buttons.
Understanding the LCD display and using function keys for mode selection.
Navigating and selecting stitch patterns using mode and arrow keys.
Adjusting stitch width and length using dedicated keys.
Using memory and clear keys for pattern management.
Procedures for lifting, changing the presser foot, and managing the foot holder.
Adjusting needle thread tension for balanced stitches and troubleshooting tension issues.
Adjusting the feed dog mechanism to drop or raise it.
Setting the needle's stop position to up or down.
How to change the needle and a chart for fabric/needle compatibility.
Procedures for setting the spool of thread and winding the bobbin.
Correctly inserting the bobbin into the bobbin holder.
Step-by-step guide for threading the sewing machine.
Instructions for using the automatic needle threader.
How to bring the bobbin thread up to the needle area.
Performing a basic straight stitch, changing direction, and sewing thick fabrics.
Measuring seam allowance with guides and turning square corners.
Modifying needle position and stitch length for specific sewing needs.
Explains Lock-a-matic, Locking, and Triple Stretch stitches.
Details on Stretch and Sculpture stitches for flexible and decorative seams.
Using the zigzag stitch and adjusting its width and length.
Techniques for overcasting raw edges with zigzag and overedge stitches.
Specific stitches for knits, double overedging, and attaching elastic.
An overview of the 12 available buttonhole types.
Step-by-step guide to sewing a square buttonhole.
Adjusting the width and density of buttonholes.
Instructions for round-end, keyhole, stretch, antique, and knit buttonholes.
How to sew corded and welted buttonholes.
How to perform darning stitches and adjust their evenness.
Using the tacking stitch for reinforcement and sewing eyelets.
Step-by-step instructions for sewing zippers.
How to create a blind hem and adjust needle drop position.
Techniques for sewing buttons and creating gathers.
Techniques for patchwork piecing, decorative patchwork, and creating shelltucks.
Sewing appliques onto fabric and creating pintucks.
Techniques for fringes, drawn work, and French/Candlewick knots.
Decorative stitches like cross stitch, fagoting, and scallop stitches.
Creating smocking, stippling, and clasp stitches.
Using satin stitches and general guidelines for decorative stitches.
Programming auto-lock stitches and pattern combinations.
Deleting, inserting, or adding spaces to programmed pattern combinations.
Entering text and adjusting deformed stitch patterns.
Instructions for cleaning the hook race, feed dog, and installing the bobbin holder.
To Next Page
