55
Programming Letters
In mode A or À, you can program text by entering the
number of alphabets.
To program numbers, alphabets or symbols, enter the
mode A.
To program European accented letters, enter the mode À.
Use the stitch chart for refering the number of alphabets.
Example: To program “
Deppé
”
z Press the mode key to enter mode A.
Enter 13 to select upper case letter “
D”.
Press the memory key.
z
b
x
c
v
x Enter 40 to select lower case letter “
e”.
Press the memory key.
c Enter 51 to select lower case letter “
p”.
Press the memory key.
v Enter 51 to select lower case letter “
p”.
Press the memory key.
b Press the mode key to enter mode À.
The 3 lights will be lit at the same time.
Enter 53 to select lower case letter “
é”.
Press the memory key.
n n Start sewing.
A pattern series will be sewn.
Correcting Deformed Stitch Patterns
The sewing results of stretch stitch patterns may vary
depending on sewing conditions, such as sewing speed,
fabric type, number of layers etc.
If stretch stitch patterns are deformed, correct them by
turning the feed balancing dial with the screwdriver.
If the pattern is compressed, turn the dial in the direction
of “+”.
If the pattern is drawn out, turn the dial in the direction of
“–”.
q Feed balancing dial
(+)
(–)
q
To Next Page
Loading...
