52
PROGRAMMING PATTERNS AND
LETTERS
Programming the Auto-lock Stitch
Example: Pattern #31 (mode 2)
z Select pattern 31 (mode 2).
x Press the memory key.
The cursor appears under the stitch pattern number,
and the pattern number starts blinking. This indicates
that the stitch pattern 31 is memorized.
The number q which appears above the stitch length
key indicates the sequence number of the stitch
pattern in the combination. The programmed pattern
combination will be sewn in this sequence.
q Sequence number
c Select pattern 99 (mode 2).
z
b
x
v Press the memory key.
b Place the fabric and sew.
The machine will sew a locking stitch, stitch pattern
31, locking stitch and stop.
c
v
q
NOTE:
• Patterns in the different mode, letters and numbers
can also be programmed.
• Stitch length and width cannot be adjusted when
programming a pattern combination.
• Up to 50 stitch patterns combination can be
memorized.
To Next Page
Loading...
