54
b Enter “31” in mode 2 to select stitch pattern 31 ( ).
Press the memory key to insert the stitch pattern 31
between the stitch patterns 33 and 34.
c Press “–” on the stitch width adjusting key q. The
sequence number indicates “02” t, the stitch pattern
number indicates “37” y, and the green light indicates
the mode u of the stitch pattern “37”.
Deleting or Inserting a Pattern (letter)
Example: To delete the pattern “ ” from the pattern
combination “ ” and insert the pattern “ ”.
z Refer to procedure z to v on page 53, “Programming
the Pattern Combination” to enter the stitch patterns
33, 37 and 34 in mode 2.
x Press “–” on the stitch width adjusting key q. The
number w which appears above the stitch width
adjusting key indicates the sequence number of the
stitch pattern in the combination, and the number e
above the stitch length adjusting key indicates the
total number of the pattens in the combination.
The green light r indicates the mode of the stitch
pattern.
z
w
ty
x
e
q
c
v Press the clear key. The stitch pattern 37 ( ) is
deleted from the pattern combination.
v
b
r
q
u
Inserting Space between Patterns
Example: Patterns #34 in mode 2 and #89 in mode A.
z Select pattern 34 in mode 2.
x Press the memory key.
c Select pattern 89 in mode A.
v Press the memory key.
b Start sewing. A 5 mm space will be inserted between
the patterns.
Spaces
Pattern #87 (MODE A) Approximately 2.5 mm
Pattern #88 (MODE A) Approximately 3.5 mm
Pattern #89 (MODE A) Approximately 5 mm
To Next Page
Loading...
