Janome MOD-200 - Satin Stitches and Decorative Stitching Guidelines

50
q
q
You can close quilt layers and using the clasp stitch.
Select the clasp stitch.
Press the auto-lock button.
Start sewing.
The machine sews clasp stitch and locking stitch then
stops automatically.
q Auto-lock button
Clasp Stitches
q Stitch pattern: MODE 2: 12 or 13
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
4
q
w
e
Satin Stitches
q Stitch pattern: MODE 2: 31
w Thread tension dial: 1 to 4
e Presser foot: Satin stitch foot F
* The stitch patterns 29-30 and 32-44 in mode 2 can also
be used.
4
q
w e
For better sewing results, interfacing should be used
on the wrong side of the fabric when you use stretch or
elastic fabrics.
Press the auto-lock button to finish the end of the pattern.
q Auto-lock button
A pre-programmed stippling stitch is a fast and easy
method to quilt small areas.
Place a batting (wadding) between quilt top and backing
fabric.
4
q
w
e
Stippling Stitch
q Stitch pattern: MODE 2: 04
w Thread tension dial: 3 to 6
e Presser foot: Satin stitch foot F
* The stitch patterns 02, 03 and 05 in mode 2 can also be
used.