Need help?Do you have a question about the Janome MC300E and is the answer not in the manual?
General| Type | Embroidery Machine |
|---|---|
| Maximum Embroidery Speed | 650 stitches per minute |
| LCD Screen | Yes |
| USB Connectivity | Yes |
| Needle Threader | Yes |
| Speed Control | Yes |
| Free Arm | No |
| Embroidery Area | 7.9" x 7.9" |
| Hoop Size | 5.9 x 7.9 inches (150 x 200 mm) |
| Stitches | Not applicable (embroidery machine) |
| Buttonhole Styles | Not applicable (embroidery machine) |
| Presser Feet | Embroidery Foot |
| Stitch Length | Not applicable (embroidery machine) |
| Stitch Width | Not applicable (embroidery machine) |
How to position the needle correctly in the needle plate hole.
Procedure to set the correct timing between the needle and the rotary hook.
Method for adjusting the needle bar height relative to the rotary hook.
Steps to set the correct clearance between the needle and hook.
How to adjust the rotary play of the hook drive and lower shaft gears.
Procedure for setting the correct height of the needle stop position.
Method to adjust the upper thread tension to specified gram values.
Method for adjusting the X and Y axis sensors for proper carriage positioning.
To Next Page
