Need help?Do you have a question about the Janome MC9900 and is the answer not in the manual?
General| Type | Computerized Sewing and Embroidery Machine |
|---|---|
| Stitch Options | Yes |
| Maximum Stitch Width | 7 mm |
| Maximum Stitch Length | 5 mm |
| Display | LCD Touchscreen |
| USB Connectivity | Yes |
| Automatic Needle Threader | Yes |
| Weight | 26.5 lbs (12 kg) |
| Sewing Speed | Up to 1, 000 stitches per minute |
| Built-in Stitches | 200 |
| Buttonholes | 10 |
| Lighting | LED |
| Knee Lifter | Yes |
| Presser Feet | Multiple Included |
| Automatic Thread Cutter | Yes |
| Built-in Memory | Yes |
| Stitches | 200 |
Instructions for removing and installing the main circuit board A.
Guidance on replacing the unit that supplies power.
Procedure for removing and installing the machine's driving motor.
Steps for replacing the thread tension assembly.
Adjusting the vertical position of the feed dogs for proper fabric movement.
Setting the precise gap between the needle and hook tip.
Adjusting gear play for smooth rotary hook operation.
Calibrating the needle's lateral position during stitching.
Synchronizing the rotary hook's rotation with the needle's movement.
Adjusting the vertical travel distance of the needle bar.
Calibrating the tension applied to the upper thread.
Adjusting the presser foot lifter for correct height and parallelism.
To Next Page
