6
Front cover
To remove:
1. Remove the belt cover, top cover and base plate (see
pages 1, 2 and 3).
2. Loosen the setscrews A, B, C, D and E (see fig. 1-5).
3. Push the rear cover through the holes F and G with a
screwdriver to remove the hook of rear cover.
4. Remove the front cover.
To attach:
1. Follow the above procedure in reverse.
Changing External Parts (6)
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Setscrew A
Front cover
Setscrew B
Front cover
Hole F
Hole G
Setscrew D
Front coverSetscrew C
Fig. 5
Setscrew E Front cover
To Next Page
Loading...
