Janome MC9900 - Bed Cover; Free Arm Cover

4
Pin
Free arm cover
Changing External Parts (4)
Bed cover
To remove:
1. Remove the setscrews (x 2).
2. Remove the bed cover.
To attach:
1. Follow the above procedure in reverse.
Bed cover
Setscrew
Fig. 1
Fig. 2
Needle plate
Free arm cover
Free arm cover
To remove:
1. Remove the needle and presser foot holder.
2. Press down the needle plate release lever to release
the needle plate (see fig. 1).
3. Remove the bed cover.
Needle plate release lever
4. Remove the pin (see fig. 2).