Janome MC9900 - Base Plate; Base Cover

3
Setscrews
Changing External Parts (3)
Base plate
To remove:
1. Remove the setscrews (x 4).
2. Remove the base plate.
To attach:
1. Follow the above procedure in reverse.
Base plate
Fig. 1
Rail cover
Setscrews
SetscrewsBase cover
Fig. 2
Base cover
To remove:
1. Slide the rail cover in the direciton of arrow to remove
the rail cover (see fig 1).
2. Remove the setscrews (X4) (see fig 2).
Remove the base cover.
To attach:
1. Follow the above procedure in reverse.