16
b Attach the hook cover plate. Check the threading by
referring to the diagram r shown on the hook cover
plate.
r Threading diagram
c Draw the thread to the left, sliding it between the
tension spring blades.
Inserting the bobbin
CAUTION:
Turn OFF the power switch before inserting the bobbin
and threading the bobbin holder.
z Place a bobbin in the bobbin holder with the thread
running off counterclockwise.
q End of thread
x Guide the thread into the rst notch w on the front
side of the bobbin holder.
w Notch
v Continue to draw the thread lightly until the thread
slips into the second notch e. Pull out about 6˝ (15
cm) of thread.
e Notch
z
x
c
v
b
q
w
e
r
To Next Page
Loading...
