Need help?Do you have a question about the Janome HD 3000 and is the answer not in the manual?
General| Built-in Stitches | 18 |
|---|---|
| Maximum Stitch Width | 6.5 mm |
| Maximum Stitch Length | 4 mm |
| Sewing Speed | 860 stitches per minute |
| Buttonhole | 1-step |
| Needle Threader | Yes |
| Free Arm | Yes |
| Drop Feed | Yes |
| Weight | 18.7 lbs |
| Type | Mechanical |
| Adjustable Stitch Length | Yes |
| Adjustable Stitch Width | Yes |
| Reverse Stitch | Yes |
| Warranty | 25-year limited warranty |
| Bobbin Type | Top loading full rotary hook bobbin |
| Included Feet | Zipper Foot, Satin Stitch Foot, Overedge Foot |
How to correct lateral needle movement in straight stitch mode.
Adjusting the timing for lateral needle swing in zigzag stitching.
Rectifying needle bar lateral movement when changing zigzag width.
Adjusting needle position in the plate hole for straight and zigzag stitches.
Setting the correct clearance between the needle and the rotary hook tip.
Adjusting the timing of the rotary hook relative to the needle bar movement.
Setting the correct tension for the needle thread.
To Next Page