64
qw
Shell Tucking
Machine Settings
q Pattern: #15
w Presser foot: Satin stitch foot F
e Thread tension: 6–8
Increase the needle thread tension to “6–8”.
Fold and stitch on the bias.
Place the folded edge of the fabric along the slit of
the foot so that the right swing of the needle falls off
the edge of the fabric to form tucks.
After sewing, open the fabric and iron tucks to one
side.
For better sewing results, interfacing should be used on
the wrong side of fabric on stretch or
elastic fabrics.
Press auto-lock button while sewing the last pattern, and
machine will stop automatically after the last pattern is
finished.
Satin Stitches
Machine Settings
q Pattern: #24 to #27
w Presser foot: Satin stitch foot F
DECORATIVE STITCHES
qw
To Next Page
Loading...
