Need help?Do you have a question about the Janome 3160QOV and is the answer not in the manual?
General| Brand | Janome |
|---|---|
| Model | 3160QOV |
| Category | Sewing Machine |
| Language | English |
Procedure for removing and attaching the face cover of the sewing machine.
Steps to remove and attach the free-arm cover.
Instructions for removing and attaching the front cover, including screw locations.
Further steps for removing and attaching the front cover.
Detailed steps for removing and attaching the rear cover of the sewing machine.
Adjusting the distance between the presser foot and the needle plate to 6.0 mm.
Setting the correct needle drop position for optimal sewing performance.
Procedure for aligning the rotary hook with the needle for correct timing.
How to adjust the needle bar height relative to the hook timing.
Procedure for setting the needle to hook tip clearance to -0.1 to +0.05 mm.
Adjusting the highest position of the feed dog to 0.80-0.90 mm.
Specific feed dog adjustment for model 3160QDC, ensuring parallelism.
How to adjust the top thread tension to be between 65 and 80g.
Steps to adjust the buttonhole lever guide and sensor position.
Identifies various connectors and their corresponding components on Circuit board A.
Procedure for removing and attaching Circuit board-A, including screw and connector details.
Guide on selecting the correct setting for Circuit board A based on the sewing machine model.
Instructions for removing, attaching, and adjusting the belt tension of the driving motor.
Steps for removing and attaching the switching regulator unit.
Checks the functionality of the LCD display, buzzer, and sewing lamp.
Verifies the response of various buttons during the diagnostic test.
Checks the operation of the buttonhole sensor and its related feedback.
Tests the functionality of the bobbin winder switch and its indicator.
Verifies the operation of the presser foot lifter switch.
Checks the upper shaft positioning sensor during needle bar movement.
Tests the functionality of the zigzag and feed motors.
Verifies the operation of the foot control pedal.
Checks the functionality of the slide volume control.
Tests the starting, stopping, and stability of the DC motor.
Checks the operation of the solenoid, specifically for thread tension disc opening.
Tests the thread cutter motor and button functionality.
Procedure to display the version of the sewing machine's program.
To Next Page