17
11.Pull the threader to pass the thread through the
hole of lower looper thread guide (5).
Remove the thread from the threader, and draw
the thread through the hole on the lower looper
10 cm (4˝) or more with a pair of tweezers.
* For threading without the looper threader, draw
the thread from the right side of lower looper
thread guide (5) with a pair of tweezers.
* And draw the thread through the hole on the
lower looper 10 cm (4˝) or more with a pair of
tweezers.
11
Lower looper
(1) Looper threader
(2) Tweezers
NOTE: How to thread woolly nylon/polyester thread.
* The illustration at left shows one of the easiest
ways to pass woolly nylon/polyester thread
through the lower looper.
1
Lower looper
2 Ordinary thread
3 Woolly nylon/polyester thread
11
11
1
2
3
(1)
(2)
Janome Serger 8002D Instruction Manual
8002D Owners Manual/ User Guide
To Next Page
Loading...
