Janome Stirling 8002D User Manual

1
enquiries@esqaustralasia.com.au
The product is guranteed to be free from defects in workmanship and parts for a period of
12 months from date of purchase. Defects that occur within this warranty period, under
normal use and care, will be repaired, replaced or refunded at our discretion, solely at our
option with no charge for parts and labour. The benefits conferred by this warranty are in
addition to all rights and remedies in respect of the product that the consumer has under
the Competition & Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Overlocker
AFTER SALES SUPPORT
AUS Hotline Costs MODEL: 8002D PRODUCT CODE: 52832 04/2016
1300 526 663
AUS
by

Janome Stirling 8002D Specifications

General

Type	Overlock
Stitch Length	1 - 4 mm
Differential Feed	Yes
Maximum Sewing Speed	1300 stitches per minute
Number of Needles	1 or 2
Stitch Width	3.1 - 7.3 mm
Differential Feed Ratio	0.5 to 2.25
Number of Threads	3 or 4

Summary

Warranty Details and Product Introduction

Warranty Details

Details the product guarantee and consumer rights.

Repair and Refurbished Goods Notice

Informs about repair processes and use of refurbished parts.

Welcome Message

Congratulates the user on purchasing the product.

General Safety and Operating Instructions

General Safety Instructions

Provides essential safety guidelines for operating the machine.

Sewing and Maintenance Guidelines

Instructions for sewing, maintenance, and repair restrictions.

Machine Overview and Setup

Parts List and Accessories

Identifies all parts and standard accessories of the overlocker.

Machine Features

Highlights the key features and functionalities of the overlocker.

Power Supply and Basic Controls

Connecting power, safety precautions, and controlling sewing speed.

Machine Adjustments and Operations

Component Operations

Operations for handwheel, covers, and thread guide bar.

Needle and Presser Foot Adjustments

Changing needles and adjusting presser feet and pressure.

Stitch, Feed, and Cutting Width Adjustments

Adjusting stitch length, differential feed, and cutting width.

Upper Knife and Needle Plate Settings

Operating the upper knife and adjusting needle plate settings.

Threading Procedures

Threading the Machine (4 Threads)

Comprehensive guide for threading the overlocker with four threads.

Threading Loopers and Needles

Step-by-step instructions for threading loopers and needles.

Sewing Techniques and Tension Control

Sewing Procedures and Seam Securing

Procedures for starting, continuing, and securing seams.

Thread Tension Control (4 & 3 Threads)

Understanding and adjusting thread tension for different thread counts.

Specialty Sewing and Decorative Stitches

Special Hemming Techniques

Machine settings for rolled, picot, and narrow hemming.

Decorative Overedging and Pin Tucking

Techniques for decorative overedging and pin tucking.

Machine Care and Troubleshooting

Component Replacement and Maintenance

Replacing components and general maintenance procedures.

Troubleshooting Common Issues

Common problems and their solutions for the overlocker.

Appendices

Spare Parts, Technical Data, and Disposal

Information on spare parts, specifications, and responsible disposal.