EasyManua.ls Logo

Janome stirling - User Manual

Janome stirling
34 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
1
enquiries@esqaustralasia.com.au
The product is guranteed to be free from defects in workmanship and parts for a period of
12 months from date of purchase. Defects that occur within this warranty period, under
normal use and care, will be repaired, replaced or refunded at our discretion, solely at our
option with no charge for parts and labour. The benefits conferred by this warranty are in
addition to all rights and remedies in respect of the product that the consumer has under
the Competition & Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Sewing Machine
AFTER SALES SUPPORT
AUS Hotline Costs MODEL: 311 PRODUCT CODE: 52829 04/2016
1300 526 663
AUS
by

Table of Contents

Questions and Answers

  • R
    Ryan ThompsonAug 12, 2025
    Why does the needle thread keep breaking on my Janome stirling?
    • Q
      qrogersAug 12, 2025
      The needle thread may break for several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is incorrectly inserted. * The needle thread and the bobbin thread are not set properly under the presser foot at the beginning of sewing. * The fabric is not drawn to the rear when the sewing has finished. * The thread is either too heavy or too fine for the needle.
  • J
    Jade ThompsonAug 16, 2025
    Why does my Janome stirling needle keep breaking?
    • E
      Emily MyersAug 16, 2025
      Your sewing machine needle might be breaking because: * The needle is incorrectly inserted. * The needle is bent or blunt. * The needle clamp screw is loose. * The needle thread tension is too tight. * The fabric is not drawn to the rear when the sewing has finished. * The needle is too fine for the fabric being sewn.
  • M
    Marissa JonesAug 19, 2025
    What to do if my Janome Sewing Machine skips stitches?
    • J
      Joseph VaughanAug 19, 2025
      If your sewing machine is skipping stitches, it could be due to several reasons: * The needle is incorrectly inserted. * The needle is bent or blunt. * The needle and/or threads are not suitable for the work being sewn. * A blue tip needle is not being used for sewing stretch, very fine fabrics and synthetics. * The needle thread is not threaded properly. * The wrong needle is being used; in this case, change the needle.
  • J
    Jennifer WatersAug 25, 2025
    Why does the bobbin thread break on my Janome stirling?
    • U
      uhughesAug 25, 2025
      The bobbin thread may break if: * The bobbin thread is not threaded properly in the bobbin case and shuttle. * Lint has collected in the shuttle area. * The bobbin is damaged and does not turn smoothly. If this is the case, replace the bobbin.
  • T
    Taylor RossAug 27, 2025
    Why is my Janome Sewing Machine not working?
    • J
      jennifer47Aug 27, 2025
      Your Janome Sewing Machine may not be working because: * The machine is not plugged in. * A thread is caught in the shuttle race. * The clutch is disengaged.
  • G
    Gary HawkinsAug 31, 2025
    Why is my Janome stirling making so much noise?
    • M
      Mary BakerAug 31, 2025
      Noisy operation may be caused by: * Thread caught in the shuttle race. * Lint build-up in the shuttle or the shuttle race.
  • M
    Mr. Patrick Moreno DDSSep 3, 2025
    Why is my Janome Sewing Machine seam puckering?
    • K
      Kayla WatsonSep 4, 2025
      Seam puckering can occur due to: * The needle thread tension being too tight. * The needle thread not being threaded properly. * The needle being too heavy for the fabric being sewn. * The stitch length being too long for the fabric. If this is the case, make the stitch shorter.
  • H
    Hannah WellsSep 7, 2025
    Why is the fabric not feeding smoothly through my Janome stirling?
    • K
      Kenneth WilliamsonSep 7, 2025
      The fabric might not feed smoothly because: * The feed dog is packed with lint. * The stitches are too fine; in this case, make the stitch longer.

Summary

Warranty Details

Warranty Period and Terms

Details the 12-month warranty, covering defects in workmanship and parts, and repair/replacement policies.

Consumer Rights Under Australian Law

Outlines consumer entitlements such as replacement, refund, or compensation for major failures.

Repair and Refurbished Goods Notice

Data Loss During Repair

Warns users about potential loss of user-generated data when the product is sent for repair.

Use of Refurbished Parts

States that only refurbished parts meeting ALDI's quality specifications are used for repairs.

Escalating Repair Complaints

Provides contact information to escalate complaints if a repair is handled unsatisfactorily.

General Safety Instructions

Safety Precautions for Children

Advises on keeping children and pets away from the appliance and its parts.

Electrical Safety and Handling

Details precautions regarding electrical safety, unplugging, and not leaving the appliance unattended.

Ambient Conditions

Lists environmental restrictions such as avoiding moisture, heat, and direct sunlight.

Sewing and Maintenance

General Sewing Guidelines

Provides basic sewing advice like using a stable table and keeping fingers away from moving parts.

Maintenance and Repair Advice

Explains maintenance procedures and advises against self-repair, directing users to after-sales support.

Parts List

Machine Components Identification

Identifies and labels various parts of the sewing machine with a diagram.

Accessories and Features

Standard Accessories

Lists and illustrates the standard accessories included with the sewing machine.

Extension Table Usage

Explains how to use the detachable extension table for increased sewing surface.

Free Arm Sewing

Describes how to perform free arm sewing for circular garment areas.

Unpacking and Initial Checks

Unpacking Procedure

Guides on safely unpacking the product and handling packaging materials.

Checking for Damage

Advises inspecting the power cord and appliance for any damage before use.

Machine Features

Stitch Capabilities

Highlights the machine's 13 built-in stitches, including a 4-step buttonhole.

Convertible Free Arm

Explains the benefit of the detachable extension table for free arm sewing convenience.

Needle Plate Guide Lines

Describes the dual seam guidelines on the needle plate for accurate stitching.

Using Control Dials

Stitch Selector Dial

Instructions on how to set the stitch selector dial to choose a desired pattern.

Stitch Length Dial

Guide on adjusting the stitch length dial for various stitch types.

Operating Controls

Reverse Stitch Button

Explains how to use the reverse stitch button to sew backwards.

Darning Plate

Details on how to attach and use the darning plate for darning or free-motion sewing.

Power and Speed Control

Connecting the Power Supply

Step-by-step instructions for connecting the power supply to the machine.

Controlling Sewing Speed

Explains how the foot control regulates the sewing machine's speed.

Presser Foot Operations

Presser Foot Lifter

Describes the function and positions of the presser foot lifter.

Changing the Presser Foot

Detailed procedure for removing and attaching different presser feet.

Foot Holder Attachment

Instructions on how to attach and remove the foot holder assembly.

Needle Management

Changing Needles

Step-by-step guide for safely removing and inserting sewing machine needles.

Fabric and Needle Chart

Recommends suitable needle sizes and types for various fabric weights and types.

Bobbin Area Operations

Setting Spool Pins

Instructions on how to use and store the spool pins for thread feeding.

Bobbin Case Handling

Guidance on removing the bobbin case and inserting it correctly.

Bobbin Winding and Threading

Winding the Bobbin

Step-by-step guide for winding thread onto the bobbin.

Threading the Bobbin Case

Instructions on how to thread the bobbin case correctly for sewing.

Threading the Machine

Upper Threading Procedure

Detailed steps for threading the upper thread path, from spool to needle.

Thread Tension Adjustment

Drawing Up Bobbin Thread

Explains how to draw up the bobbin thread to the top of the fabric.

Thread Tension Dial

Guides on adjusting thread tension for correct stitch formation.

Basic Sewing Operations

Straight Stitch Sewing

Instructions for performing a basic straight stitch with correct settings.

Changing Sewing Direction

How to pivot the fabric to change sewing direction at corners.

Sewing Techniques

Seam Guide Lines

Explains the purpose and use of seam guide lines on the needle plate.

Turning a Square Corner

Method for sewing precise square corners on fabric.

Zigzag Stitching

Instructions for setting up and performing a standard zigzag stitch.

Utility Stitching

Tricot Stitch

Describes the Tricot stitch for finishing raw edges on synthetic fabrics.

Knit Stitch

Explains the Knit stitch for swimwear and stretch fabrics, providing elasticity.

Stretch Stitching

Straight Stretch Stitch

Details the Straight Stretch stitch for reinforcing seams and stretch fabrics.

Rick-rack Stretch Stitch

Explains the Rick-rack Stretch stitch for decorative topstitching on stretch fabrics.

Sewing Buttons

Button Sewing Procedure

Step-by-step guide to sewing buttons using the darning plate.

Buttonhole Creation

Making a Buttonhole

Detailed instructions for sewing machine-made buttonholes.

Special Sewing Applications

Zipper Application

Instructions on how to successfully sew zippers into garments.

Blind Hem Stitch

Method for creating neat blind hems on various fabric types.

Decorative Stitching

Shell Tuck Stitch

Guide to creating decorative shell tucks on lightweight fabrics.

Smocking

Procedure for creating gathered smocking effects on fabric.

Applique and Stretch Patterns

Applique

Instructions for stitching around applique pieces for decorative effects.

Stretch Stitch Patterns

Guidance on adjusting stitch length for stretch patterns to prevent distortion.

Machine Care and Maintenance

Cleaning Bobbin Case and Shuttle Race

Instructions for cleaning the bobbin case and shuttle race area.

Shuttle Race Unit Maintenance

Steps for dismantling and reassembling the shuttle race unit.

Cleaning the Feed Dog

How to clean lint and dust from the feed dog teeth.

Sewing Light Replacement

Changing the Sewing Light Bulb

Procedure for replacing the sewing machine's light bulb, including safety warnings.

Troubleshooting Common Issues

Needle Thread and Breakage

Diagnoses causes and solutions for needle thread breaking.

Bobbin Thread Issues

Identifies causes and solutions for bobbin thread breakage or tangling.

Needle Breakage and Skipped Stitches

Troubleshooting for needle breakage and skipped stitches.

Machine Operation Problems

Addresses issues like fabric feeding, machine not working, and noisy operation.

Spare Parts and Specifications

Obtaining Spare Parts

Lists available spare parts and provides contact information for ordering.

Technical Specifications

Details the machine's power, dimensions, weight, and other technical parameters.

Product Compliance

Lists the safety and electromagnetic compatibility standards the product complies with.

Disposal and Storage

Responsible Disposal

Provides guidance on environmentally responsible disposal of the appliance.

Storage and Protection

Offers tips for storing the machine to protect it from dust and moisture.

Janome stirling Specifications

General IconGeneral
Speed ControlYes
Start/Stop ButtonYes
Maximum Stitch Length5mm
Maximum Stitch Width7mm
Dimensions406 x 177 x 302 mm

Related product manuals