Janome stirling - Sewing Techniques; Seam Guide Lines; Turning a Square Corner; Zigzag Stitching

21
AFTER SALES SUPPOR
T
AUS Hotline Costs
1300 526 663
AUS
enquiries@esqaustralasia.com.au
MODEL: 311 PRODUCT CODE: 52829 04/2016
Number
15 20 4/8 5/8 6/8
Distance
(cm)
1.5 2.0 1.3 1.6 1.9
q
q
w
w e
q
r
e
(Fig. 1)
(Fig. 2)
(Fig. 3)
q Center needle position
w Guide lines
e Numbers
Seam Guide Lines
(Fig. 1)
The numbers on the needle plate indicate the dis-
tance between the center needle position and the
guideline.
The numbers in front are centimeters.
The numbers in back are fractions of an inch.
Turning a Square Corner
(Fig. 2)
To turn a square corner 5/8˝ (1.6 cm) from the fabric
edge.
Stop stitching and lower the needle by turning the
handwheel counterclockwise.
Raise the presser foot and turn the fabric to line the
edge with the 5/8˝ (1.6 cm) seam guide.
Lower the presser foot and begin stitching in the
new direction.
Line up the fabric edge facing you with the cornering
guide shown.
q
Cornering guide
q
Pattern selector: C
w
 Presserfoot: Zigzagfoot
e
Thread tension: 2–5
r
Stitch length: 0.5–4
Zigzag Stitching
(Fig. 3)
Simplezigzagstitchingiswidelyusedfor
overcasting, sewing on buttons, etc.
Turnthepatternselectorbetweenthezigzagstitch
(C) and straight stitch (left position) (B) to adjust the
stitch width.