Janome Sewist 725s User Manual (English)

Questions and Answers:

M
mprestonJul 27, 2025
Why does the needle thread keep breaking on my Janome Sewing Machine?
- A
  Amanda GarciaJul 27, 2025
  The needle thread may break due to several reasons: * The needle thread is not threaded properly. * The needle thread tension is too tight. * The needle is bent or blunt. * The needle is incorrectly inserted. * The needle thread and the bobbin thread are not drawn to the rear and set properly under the presser foot when starting sewing. * The fabric is not drawn to the rear when sewing is finished. * The thread is too heavy or too fine for the needle.
C
Cathy HaleJul 31, 2025
Why is my Janome Sewist 725s Sewing Machine needle breaking?
- T
  tonydavisJul 31, 2025
  Your Janome Sewing Machine needle may be breaking because: * The needle is incorrectly inserted. * The needle is bent or blunt. * The needle clamp screw is loose. * The proper foot is not being used. Use the proper foot. * The fabric is not drawn to the rear when sewing is finished. * The needle is too fine for the fabric being sewn.
T
Thomas DelgadoAug 4, 2025
How to prevent seam puckering on Janome Sewist 725s?
- M
  Miranda HoustonAug 5, 2025
  Seam puckering on your Janome Sewing Machine can occur because: * The needle thread tension is too tight. * The needle thread is not threaded properly. * The needle is too heavy for the fabric being sewn. * The stitch length is too long for the fabric. Make stitch shorter. * For very fine fabrics, use a stabilizer.
D
diamond58Aug 9, 2025
Why is the needle thread looping on my Janome Sewing Machine?
- C
  Caleb ReedAug 9, 2025
  Needle thread looping on your Janome Sewing Machine can be caused by: * The needle thread tension being too loose. * The needle size not being suitable for the thread.
P
Patricia JohnsonAug 13, 2025
Why is the cloth not feeding smoothly through my Janome Sewist 725s Sewing Machine?
- F
  fsimmonsAug 13, 2025
  If the cloth is not feeding smoothly through your Janome Sewing Machine, it may be due to: * The feed dog being packed with lint. * The stitches being too fine. Make stitch longer. * The feed dog not being raised after being lowered. * The foot pressure not being adjusted properly.
T
Tony Johns DVMAug 17, 2025
Why is the buttonhole not sewn well on my Janome Sewist 725s?
- J
  john95Aug 17, 2025
  A poorly sewn buttonhole on your Janome Sewing Machine may be due to: * The stitch density not being suitable for the fabric being sewn. * Interfacing not being used with stretch fabrics.
M
matthew50Aug 22, 2025
Why are patterns distorted on my Janome Sewist 725s Sewing Machine?
- M
  Miguel ThorntonAug 22, 2025
  Patterns may be distorted on your Janome Sewing Machine if the stitch is not balanced.

Janome Sewist 725s Specifications

General

Type	Manual sewing machine
Free arm	Yes
Control type	Lever, Rotary
Stitch width	5 mm
Product color	White
Stitch length	4 mm
Buttonhole type	1 Step
Number of programs	23
Sewing machine functions	Sewing
Number of stitch patterns	-
Number of illumination LEDs	1
Power supply type	Mechanical