Need help?Do you have a question about the Janome SKYLINE S6 and is the answer not in the manual?
General| Type | Automatic sewing machine |
|---|---|
| Display | LCD |
| Free arm | Yes |
| Handle(s) | No |
| Control type | Rotary, Touch |
| Stitch width | 5 mm |
| Product color | White |
| Buttonhole type | 10 One-step |
| Automatic buttonhole | - |
| Sewing machine functions | Sewing |
| Number of stitch patterns | 196 |
| Number of needle positions | 91 |
| Number of illumination LEDs | 6 |
| Sewing machine accessories included | Buttonhole foot, Zigzag foot |
| AC input voltage | 80-240 V |
| Power supply type | Electric |
Weight and Dimensions| Depth | 234.95 mm |
|---|---|
| Width | 482.6 mm |
| Height | 317.5 mm |
| Weight | 10795 g |
Adjusting the feed dog height to the correct clearance from the needle plate surface.
Ensuring the needle is centered in the needle plate hole at specified positions.
Setting the correct clearance between the presser foot and needle plate, and ensuring parallelism.
Setting the timing for the rotary hook to meet the needle at the correct position.
Adjusting the needle bar height relative to the hook race.
Adjusting clearance between needle and rotary hook tip using Method 1.
Adjusting clearance between needle and rotary hook tip using Method 2.
Adjusting the switch position for the presser bar lifter to ensure correct sensor activation.
Adjusting backlash between hook drive gear and lower shaft gear for smooth operation.
Positioning the upper shaft shield plate for correct needle swing during zigzag stitching.
Setting the standard upper thread tension using the tension dial.
Steps for adjusting the buttonhole lever sensor position and guide.
Adjusting the distance between the thread cutter plate slit and the moving cutter.
Adjusting the solenoid plunger and yoke clearance for proper thread tension release.
Setting clearance between connecting link and upper feed lower shaft for feed dog (1).
To Next Page