Janome stirling - Applique and Stretch Patterns; Applique; Stretch Stitch Patterns

28
AFTER SALES SUPPORT
AUS Hotline Costs
1300 526 663
AUS
enquiries@esqaustralasia.com.au
MODEL: 311 PRODUCT CODE: 52829 04/2016
Baste (or fuse with iron-on fabric joiner) applique
pieces on the fabric.
Stitch around the applique making sure the needle
falls along the outer edge of the applique.
When sewing corners, lower the needle down into
the fabric.
Raise the presser foot and pivot the fabric to the
right or left.
w e
q
r
(Fig. 1)
Applique
(Fig. 1)
q
Pattern selector: C
w
 Presserfoot: Zigzagfoot
e
Thread tension: 1–4
r
Stitch length: 0.5−1
w e
q
r
(Fig. 2)
Stretch Stitch Patterns
(Fig. 2)
q
Pattern selector: A–G
w
 Presserfoot: Zigzagfoot
e
Thread tension: 1–4
r
Stitch length: S.S.
If forward and reverse feeds become unbalanced
due to the type of fabric, adjust the balance by turn-
ing the stitch length dial as follows:
Ifpatternsarecompressed,turnthedialtoward“+”.
Ifpatternsaredrawn,turnthedialtoward“–”.
(See page 11)