Janome stirling - Using Control Dials; Stitch Selector Dial; Stitch Length Dial

11
AFTER SALES SUPPOR
T
AUS Hotline Costs
1300 526 663
AUS
enquiries@esqaustralasia.com.au
MODEL: 311 PRODUCT CODE: 52829 04/2016
Instructions
q
Stitch Selector Dial
(Fig. 1)
Turn the stitch selector dial to set the setting mark
with the symbol corresponding to the desired
pattern.
q
Setting mark
CAUTION
To avoid needle or fabric damage, make sure
the needle is up and out of the fabric while
selecting a stitch.
(Fig. 1)
(Fig. 2)
S.S.
q
+ –
Turn the stitch length dial to set the setting mark
with the desired stitch length.
The higher the number, the longer the stitch length.
q
Setting mark
• Adjustthedialinthe0.5–4rangewhenyousew
thezigzagstitch.
• Setthedialat“S.S.”tosewthestretchstitch
pattern sewing.
• Ifthestretchstitchpatternisuneven,turn
thestitchlengthdialinthedirectionof“–”to
compressit,or“+”toexpandit.
Stitch Length Dial
(Fig. 2)