w
e
q
When inserting the bobbin case, place the horn into
the recess of the hook race.
e
Horn
Setting Spool Pins
(Fig. 1)
The spool pins are used for holding the spool of
thread in order to feed thread to the machine.
To use, pull up the spool pin. Push down for storage.
Removing or Inserting the Bobbin Case
(Fig. 2)
Open the hook cover.
q
Hook cover
Raise the needle by turning the handwheel toward
you. Take out the bobbin case by holding the latch.
w
Latch
(Fig. 1)
(Fig. 2)
To Next Page
Loading...
