x
c
q
w
e
r
t
y
o
u
i
q
(A) (B)
w
e
z
• Threading the Upper Looper
Place a spool of thread on the spool pin second
from the right.
* The points to thread for upper looper are marked
in red on the overlocker.
* A convenient threading chart is placed on the
machine body inside the looper cover.
z Draw the thread through the thread guide
second from the right from back to front: (A)
* If the thread is coming out from the thread guide
groove, pass the thread through the thread guide
hole again as shown: (B)
q Thread guide
x Pass the thread through the holes in the second
row from the right of thread guide plate as
illustrated.
w Thread guide plate
c Pass the thread through the left side of looper
thread guide sliding the thread from right to left.
e Looper thread guide
To Next Page
Loading...
