The Position of Thread Guide Bar
1. Pull the thread guide bar up as far as it will go.
2. Turn the thread guide bar so that the thread
guides are right above the spool pins.
q
Thread guide bar
w
Thread guide
e
Stoppers
r
Spool pin
* Make sure to lock the thread guide of guide pole
in the correct position with the two stoppers.
q
q
w
e
r
e
r
w
q
w
Attaching the Spool Holder Cap and Net
(Optional)
z When you use a small thread spool, pull out
the spool holder from the spool pin. Then place
the spool with its slit side up, and put the spool
holder cap on top of it.
q Spool holder
w Spool pin
e Spool holder cap
r Slit
x If the thread slips down from the spool during
threading and/or sewing, put a net on the spool
as illustrated to prevent jamming.
* The spool holder cap and net are optional
accessories.
q
Net
w
Spool pin
z
x
To Next Page
Loading...
