Why is the fabric not feeding smoothly on my Janome 8002DG?
If your Janome Sewing Machine's fabric isn't feeding smoothly, it might be due to a few reasons. First, check if the feed dog is packed with lint. Second, make sure the presser foot is lowered. If the pressure of the foot is too weak, lower the presser foot to resolve this.
General| Brand | Janome |
|---|---|
| Model | 8002DG |
| Category | Sewing Machine |
| Language | English |
To reduce the risk of electric shock.
To reduce the risk of burns, fire, electric shock, or injury.
Identification of machine components.
List of included accessories.
How to safely connect the sewing machine to power.
Adjusting sewing speed using the speed controller.
Important safety guidelines during operation.
Correct direction to turn the handwheel.
Procedures for opening and closing the machine's side cover.
Procedures for opening and closing the looper cover.
Correctly positioning the thread guide bar.
Optional steps for securing thread spools.
Step-by-step guide for replacing the machine needle.
How to adjust the presser foot position.
Instructions for detaching the presser foot.
Instructions for attaching a new presser foot.
How to adjust pressure for different fabrics.
Setting the desired stitch length.
Adjusting the differential feed for fabric stretching/gathering.
Steps to disable the upper knife.
Steps to enable the upper knife.
Adjusting the width of the cut edge.
Changing needle plate setting for different hemming types.
General guide for threading the machine with four threads.
Step-by-step instructions for threading the lower looper.
Step-by-step instructions for threading the upper looper.
Instructions for threading the right needle.
Instructions for threading the left needle.
Initial steps to begin sewing.
How to properly end a sewing session.
Techniques for uninterrupted sewing.
Utilizing guide lines on the machine for precision.
Methods to prevent fabric unravelling.
Adjusting thread tension for four-thread sewing.
Troubleshooting looper thread tension issues.
Further troubleshooting for looper thread tension imbalance.
Guide for threading the machine with three threads.
Adjusting thread tension for three-thread sewing.
Settings for specific hemming techniques.
Tips for achieving optimal results in hemming.
Achieving correct thread tension for hemming.
Performing decorative overedging.
Selecting thread and fabric for overedging.
Machine adjustments for overedging.
Performing gathering stitches.
Selecting thread and fabric for gathering.
Machine adjustments for gathering.
Performing pin tucking.
Selecting thread and fabric for pin tucking.
Machine adjustments for pin tucking.
How to sew pin tucks.
How to remove and attach the upper knife.
Cleaning the area around the upper knife.
Steps for replacing the machine's light bulb.
How to clean the feed dog mechanism.
Proper procedures for oiling machine parts.
How to safely carry the sewing machine.
To Next Page