Janome C30 - Stitch Adjustments

22
Altering the Stitch Length
The stitch length can be altered.
Press the mode key q twice.
The green light w is lit at the stitch length adjustment
mode ( ).
The stitch length value appears.
q Mode key
w Green light
Press the mode key q once.
The green light w is lit at the stitch width adjustment
mode ( ).
The needle drop position value appears.
q Mode key
w Green light
Altering the Needle Drop Position
The needle drop position can be altered for straight stitch
patterns 01 to 05.
Press the “ ” sign on the value set key e to move the
needle to the left.
Press the “ ” sign on the value set key e to move the
needle to the right.
e Value set key
q
r
r
(5.0)
(2.5)(0.0)
w
e
q
w
e
Press the “ ” sign on the value set key e to increase the
stitch length.
Press the “ ” sign on the value set key e to decrease
the stitch length.
e Value set key
r Stitch length