EasyManua.ls Logo

Janome DC 3018 - Round-end and Keyhole Buttonholes; Altering Round-end Buttonhole Width; Altering Keyhole Buttonhole Width

Janome DC 3018
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Round-end buttonhole
Press the mode key to activate the stitch width
adjustment.
Press the plus (+) key to increase the buttonhole
width.
Press the minus (–) key to decrease the buttonhole
width.
q Narrower buttonhole
w Wider buttonhole
* The width can be altered between 2.5 and 5.5.
Keyhole buttonhole
Press the mode key to activate the stitch width
adjustment.
Press the plus (+) key to increase the buttonhole
width.
Press the minus (–) key to decrease the buttonhole
width.
q Narrower buttonhole
w Wider buttonhole
* The width can be altered between 5.0 and 7.0.
* See page 23 for altering the stitch density.
Sewing procedure is the same as for the square
buttonhole #16.
q Starting point
w Bartacking
1
1
w
w
q
q
q
w
q
w
Round-end and keyhole buttonholes
Machine settings
q Stitch pattern: #17 or #18
w Foot: Automatic buttonhole foot R
Altering the buttonhole width
q
w
1
1
1
1

Table of Contents

Related product manuals