Need help?Do you have a question about the Janome DC5100 and is the answer not in the manual?
General| Type | Computerized |
|---|---|
| Buttonhole Styles | 7 |
| Maximum Stitch Width | 7 mm |
| Maximum Stitch Length | 5 mm |
| Needle Threader | Yes |
| Drop Feed | Yes |
| LCD Screen | Yes |
| Feed Dog | 7-Piece |
| Start/Stop Button | Yes |
| Speed Control Slider | Yes |
| Speed Control | Yes |
| Free Arm | Yes |
| Warranty | 25 years |
Procedure for setting the correct needle drop position.
Procedure for adjusting the needle bar height.
Procedure for setting the needle to hook timing.
Procedure for setting clearance between needle and hook.
Procedure for setting the feed dog height.
Procedure for synchronizing zigzag stitches.
To Next Page
