Need help?Do you have a question about the Janome DC3018 and is the answer not in the manual?
General| Type | Computerized |
|---|---|
| Stitch Count | 30 |
| Buttonhole Styles | 1-Step |
| Maximum Stitch Width | 7mm |
| Maximum Stitch Length | 5mm |
| Needle Threader | Yes |
| Drop Feed | Yes |
| Weight | 12.3 lbs |
| Sewing Speed | 820 stitches per minute |
| Number of Stitches | 30 |
| Start/Stop Button | Yes |
| Speed Control Slider | Yes |
| Reverse Stitch | Yes |
| Free Arm | Yes |
| Built-in Stitches | 30 |
| Speed Control | Variable |
| LCD Screen | Yes |
| Bobbin Type | Top Loading |
| Stitches | 30 |
Steps to resolve skipped stitches.
Adjusting presser bar height and alignment.
Adjusting the needle's drop position.
Adjusting the needle bar height.
Setting the timing between needle and hook.
Adjusting needle clearance to the shuttle.
Adjusting backlash between lower shaft and shuttle hook gears.
Adjusting the feed dog height.
Synchronizing zigzag stitch operation.
Adjusting needle thread tension.
To Next Page
