Janome DC5100 - Base Plate; Bed Cover

14
SEWING MACHINE MODEL DC5100
SERVICE ACCESS (3)
BASE PLATE
BED COVER
TO REMOVE:
1. REMOVE THE 2 SCREWS (A) AND 4 SCREWS (B).
2. REMOVE THE BASE (C).
TO ATTACH:
3. REVERSE THIS PROCEDURE.
TO REMOVE:
1. REMOVE THE 2 SCREWS (D).
2. REMOVE THE BED COVER (E).
TO ATTACH:
3. MOVE THE DROP LEVER TO THE LEFT AND ATTACH THE BED COVER WITH
2 SCREWS (D).
SCREW (B)
BASE (C)
SCREW (B)
SCREW (A)
2 SCREWS (D)
DROP LEVER
BED COVER (E)