30
Blind Stitch Hemming
Stitch selector: 4
Stitch width: 2Ð3
Stitch length: 1Ð3
Top thread tension: 2Ð6
Presser foot: G: Blind stitch hem foot
How to fold the fabric.
Wrong side of fabric
0.4Ð0.7 cm (5/32ýÐ1/4ý)
Sewing technique and guide setting.
* When the needle comes to the left hand
side, position the fabric so that the folded
edge comes to the left side of the guide.
Lower the presser foot.
* Adjust the position of the needle sewing
with the stitch width key so that the needle
just pierces the folded edge of the fabric
when the needle comes to the left side.
Sew guiding the folded edge along the
guide.
Wrong side of fabric
When the needle comes to right side
When the needle comes to left side
Guide
Guide dial
Folded edge
Needle
Open the fabric after sewing.
Right side of fabric
Note:
For a professional looking hem, try not to let the
needle pierce more than 1/8ý (0.2 cm) into the fold.
If the folded edge is pierced too far to left side, you
can not expect a good seam on the right side of the
fabric.
01
32
4
5
6
12340
2
1
3
To Next Page
Loading...
