54
Corded buttonhole
Machine setting
q Pattern
w LED display
e Foot R: Automatic buttonhole foot
qw e
q
w
e
z x
c
c Remove the fabric and pull the left end of the cord
to tighten it. Cut the excess cord.
Refer to page 48 for opening the buttonhole.
z With the buttonhole foot raised, hook the filler cord
on the cord spur on the back of the buttonhole foot.
Bring the ends toward you under the foot, and hook
the filler cord ends into the forks on the front of the
foot to hold them tight.
q Spur
w Forks
e Cord
x Lower the needle into the garment where the
buttonhole will start and lower the foot. Depress the
foot control and sew the buttonhole over the cord.
NOTE:
The sewing sequence is the same as the automatic
buttonhole.
Janome HT2008 Instruction Manual
Janome 2008 Sewing Machine
HT2008 Owners Manual/ User Guide
To Next Page
Loading...
