Need help?Do you have a question about the Janome New Home 580 and is the answer not in the manual?
General| Needle Threader | Yes |
|---|---|
| Adjustable Stitch Length | Yes |
| Adjustable Stitch Width | Yes |
| Buttonhole Styles | 6 |
| Drop Feed | Yes |
| Weight | 14.3 lbs |
| Stitch Length | Up to 5mm |
| Stitch Width | Up to 7mm |
Details wire colors (Blue-Neutral, Brown-Live) for mains lead connections.
Specifies required fuse ratings (3A/5A) for safe electrical connection.
Instructions for replacing the sewlight bulb with the correct type (SBC, 240V, 15W).
Enables automatic sewing of decorative patterns using cams.
Allows sewing at left, center, or right positions for pattern variation.
Highlights Triple Lock Stretch, Overlock, and Ric-Rac stitches for specific needs.
Explains the pressure regulator and thread tension dial functions.
Describes the stitch width knob and its use for pattern cam release.
Details how to activate and release the stretch stitch button.
Controls the needle's position (L, M, R) for various stitch patterns.
Adjusts stitch length and engages reverse sewing.
Sets the feed dog for different sewing operations.
Manages machine speed through pedal pressure, from slow to fast.
The light indicates the machine is connected to the power supply.
Essential precautions for safe operation, maintenance, and hazard avoidance.
Recommends thread and needle types based on fabric weight and composition.
Step-by-step instructions for correctly replacing the sewing needle.
Guidelines for selecting a straight, sharp, and appropriately sized needle.
Procedures for removing, replacing, and winding thread onto the bobbin case.
Detailed steps to thread the bobbin case for proper tension and delivery.
Guidance on using the tension dial for optimal stitch quality.
Methods for fine-tuning bobbin thread tension when needed.
Comprehensive instructions for threading the machine from spool to needle.
Method to draw the bobbin thread up through the needle plate.
Techniques for beginning sewing, turning corners, and reinforcing seam ends.
Instructions for preparing the machine, including cam removal and control settings.
Guidance on thread tension and settings for ornamental zigzag stitches.
Examples of ornamental stitches achieved by manual adjustments.
Procedure for loading and unloading pattern cams for automatic stitches.
Illustrations of various stitches produced by different pattern cams.
Instructions for using the stretch stitch button and appropriate needle type.
Guidance on achieving neat raw-edge seams with specific pattern cams.
Instructions for stitch width and needle type for reinforcing stretch materials.
Instructions for attaching the buttonhole foot and setting machine controls.
Instructions for attaching the button foot and positioning the button for sewing.
Instructions for using the zipper foot for sewing zippers on either side.
Instructions for using the hemmer foot for creating narrow hems.
Guidance on using pattern cam '11R' and the blind stitch hem guide.
Procedure for removing lint and threads from the feed dog.
Instructions for removing, cleaning, and reassembling shuttle parts.
Details lubrication points, frequency, and using paraffin for stiff machines.
Procedure for adjusting and tightening the motor belt for correct tension.
Lists causes and remedies for upper thread breakage.
Lists causes and remedies for lower thread breakage.
Identifies reasons for skipped stitches and their solutions.
Explains causes for needle breakage and recommended remedies.
Causes and remedies for loops forming in stitches.
Reasons for puckering seams and how to correct them.
Causes and remedies for inconsistent stitch appearance.
Addresses causes for machine noise and poor smooth operation, including oiling and belt tension.
To Next Page
