Janome JP760 - Threading the Machine

14
Raise the presser foot.
Press the Up/Down needle
button to raise the thread
take-up lever to its highest
position.
z Draw the thread from the spool and pass it under
the thread guide.
q Thread guide
x Draw the thread down along the right
channel and pull it up around the bottom of the
thread guide plate.
Pull the thread up along the left channel
w Right channel
e Thread guide plate
r Left channel
c Firmly draw the thread from right to left over the
thread take-up lever and down into the take-up
lever eye.
t Thread take-up lever
v Draw the thread down along the left channel and
slip the thread behind the needle bar thread guide
from the left.
y Needle bar thread guide
b Pass the thread through the needle eye from the
front.
u Needle eye
Threading the Machine
WARNING:
Turn OFF the power switch before threading the
machine.
q
w
e
r
t
y
u