Janome JP760 - Scallop Stitch; Decorative Satin Stitches

38
Decorative Satin Stitches
Machine setting
q Stitch pattern: #30 – #39
w Presser foot: Satin stitch foot F
e Thread tension: 1 – 4
Determine the appropriate stitch density by test
sewing.
For a delicate appearance on fabric such as chiffon,
use a single layer with a tear-away backing, if
necessary. Reduce the needle thread tension slightly
to achieve the better result.
Scallop Stitch
Machine setting
q Stitch pattern: #27
w Presser foot: Zigzag foot A
e Thread tension: 3 – 6
Sew the stitches approximately 3/8” (1 cm) inside
of the edge of fabric.
Trim the outside of the stitches as shown.
* Make sure you don’t cut the thread.
q
w
e
q
w
e