INSTALLATION INSTRUCTIONS
Ensure the drive unit is correctly fitted
inside the door drum assembly and
fully engaged in the steel drum wheel
Install the rolling door to the door
brackets as outlined in the Janus
installation guide
Spring tension and curtain clearances
should be maintained as per normal
practice
A U-bolt & nuts are provided with a
cast iron saddle to secure the axle of
the door to the support bracket
STEP 4.
“Proceeding with the
installation of the rolling door”
NOTE OF CAUTION !
Take care to ensure that the
cables from the drive unit are
not damaged or permitted to
bind on any part of the
structure or the door during the
installation
To Next Page
Loading...