3
Low Voltage DC motors
• Thermal overload protection device to UL325
• Quiet, safe and efficient operation
Internal Planetary Gearing Mechanism
• Gear system that provides for great capacity to operate the rolling door
• Motor runs at optimum efficiency—gear system does the “work”
• Ensures smooth operation and promotes long operator service life—tested to 80,000 cycles
Soft Start—Soft Stop
• Software designed to reduce, or soften, the load exerted on the motor during the start of the op-
eration and the stop
• Promotes greater operator service life and ensures smooth operation in both directions
Electronic Limits
• Unique electronic and mechanical design that enables the required opening and closing positions
to be set electronically and retained despite any main power fluctuation or interruption
• Simple three step process—no cams, levers, screws or micro switches
Floor Level—Cable Operated Manual Release
• No power = no lights!
• No need for a ladder
• Simple activation of the lever will enable the door to be operated manually
• Manual activation disconnects power to motor and is monitored on logic controller status
indicator panel
1. Press Learn to Commence
2. Press Up: Move door to
required open position—press
learn to confirm position and
commence learning of closed
position
3. Press Down: Move door to
required closed position—
press learn to confirm position
and commence automatic
check of both settings
To Next Page