Thank you for purchasing this quality product.Be sure to check all packing material carefully for
small parts, which may have some loose inside the carton during shipment. Identify and count all
part sent compare with the parts list.
Cleaning instruction:Clean the table surface with a furniture polish and a soft cloth.
NOTE:WHEN INSERTING SCREWS TURN CLOCKWISE UNTIL TIGHT, THEN LOOSEN 1/2--3/4
OF A TURN. AFTER CRIB IS COMPLETELY ASSEMBLED,RETURN TO EACH SCREW AND
TIGHTEN, USE WAX OR SOAP ON ALL SCREWS TO FACILITATE ASSEMBLY.
STEP 1
Assemble the stationary side frame
(part M) with end panels (part L1& L2)
using the bolts (part A & C) and Allen
wrench provided. Please place bolt A
& C in right position as picture showing.
To attach part (K) to parts(L),
insert hardware (H) into parts (L)
to lock part(K) in place by using
hardware(B).
To Next Page
Loading...