Jardine DA616BC - Step 2: Mattress Support Attachment

STEP 2
DA616BC & DA616BN CRIB WITH DRAWER
ASSEMBLY INSTRUCTION
Attach the mattress support to the 4 corner posts with the mattress support bolts (D). Use
Allen Key to tighten bolts. Refer to details 1 and 2 for direction on how to properly attach the
mattress support.
INCORRECT-
Tabs on corners
of mattress
support should
point up
INCORRECT-
Raised edge
should face
down -this
photo shows
mattress
support is
upside down
CORRECT
*Tabs to point UP.
* Flat surface of mattress support to face up
- mattress must sit on flat surface.
G
G
G
N