JAROLIFT TDRRT-01W - Programming the Timer Function; Activating and Deactivating Timer Function; Setting Inching Mode (Clock Module)

Programming the timer function 6
6
Activating and deactivating the timer function
Timer active Timer inactive
Ensure you are in the main view.
To come out of any menu in the main view, press the STOP button brie y.
While in the main menu, keep the STOP button depressed and brie y press the K2 button in order to activate or deactivate the cycle time function.
If the timer is active, the symbol of an alarm clock is shown in the main view.
Setting the inching mode (in the clock module)
Activating inching mode
Keep the STOP button depressed and then press the UP button brie y. Then release the STOP button.
Keep the
STOP button
depressed
Press the UP
button brie y
Release the STOP button
While pressing the UP or DOWN button for three seconds in the inching mode, the motor moves to the end point, or until you press the STOP button.
De-activating inching mode
Keep the STOP button depressed and then press the UP button brie y. Then release the STOP button.
Keep the
STOP button
depressed
Press the UP button
brie y
Release the STOP button
We We